 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MH303 Cellular-Band Quad-FET Mixer Product Information Product Features * * * * * * * +28 dBm IIP3 RF 820 - 920 MHz IF 20 - 100 MHz ISO & EPC compliant Low-side LO configuration +13 dBm LO Drive Level High L-I & L-R Isolation (>38 dB) Product Description The MH303 is a passive Quad-MOSFET mixer that provides high dynamic range performance in a low cost 3x3 mm 6-pin DFN (Dual Flat No-Lead) leadfree/green/RoHS-compliant package. WJ's MH303 uses patented techniques to realize +28 dBm Input IP3 at an LO drive level of +13 dBm when used in a simple application circuit with a low-side LO configuration. The LO can also be driven with higher power levels up +20 dBm to achieve higher IP3 performance. This mixer integrates internal circuitry to provide single-ended interfaces for the RF & LO ports. Typical applications include frequency up/down conversion, modulation and demodulation for receivers and transmitters used in various current and next generation RFID technologies such as EPC, ISO, ETSI, and ANSI. Their small size makes them ideal for PCMCIA applications. Functional Diagram IF1 1 6 IF2 GND 2 5 GND LO 3 4 RF MH303 * 6-pin 3x3 mm DFN lead-free/ green/RoHS-compliant Package * No External Bias Required Function IF Differential Input LO port RF port IF differential Input Ground Pin No. 1 3 4 6 2, 5 Applications * RFID: UHF * Readers * Industrial * Portable * Handheld Specifications Parameters RF Frequency Range LO Frequency Range IF Frequency Range SSB Conversion Loss Input IP3 Input IP3 Input IP3 Input 1 dB Compression Point Noise Figure LO Input Drive Level LO-RF Isolation LO-IF Isolation Return Loss: RF Port Return Loss: LO Port Return Loss: IF Port 1. 2. 3. 4. 5. Units MHz MHz MHz dB dBm dBm dBm dBm dB dBm dB dB dB dB dB Minimum 820 720 20 +26 +27 +26 Typical Maximum Comments 920 900 100 8.0 35 40 70 7.5 +27 +28 +27 +17.5 8 +13 38 44 18 12 10 See note 2 See note 3 RF = 820 MHz, See note 4 RF = 870 MHz, See note 4 RF = 920 MHz, See note 4 See note 5 LO freq = 750 - 850 MHz LO freq = 750 - 850 MHz Data was taken using an application board in a 50 system, with a low side LO at +13 dBm in a downconverting application at 25C with an IF frequency = 70 MHz. An IF frequency of 70 MHz is a nominal frequency. The IF frequency can be specified by the user within the constraints of the specified minimum and maximum RF and LO frequency range. The conversion loss includes the loss of an IF transformer (M/A COM ETC1-1-13, nominal loss 0.7 dB at 70 MHz). Input IP3 is measured with two tones with an input power of +3 dBm / tone separated by 1 MHz. Although the input P1dB level is much higher, the continuous RF input power should not exceed +12 dBm. Operation above +12 dBm may cause permanent damage. Absolute Maximum Ratings Parameters Operating Case Temperature Storage Temperature LO Input Power RF Input Power Ordering Information Part No. MH303 MH303-G MH303-PCB Rating -40 to +85 C -40 to +125 C +20 dBm +12 dBm Description Cellular-band Quad-FET Mixer (lead-tin plated pins) Cellular-band Quad-FET Mixer (lead-free/green/RoHS-compliant Package) Fully -Assembled MH303 Application Board Operation of this device above any of these parameters may cause permanent damage. Specifications and infor mation are subject to change without notice WJ Communications, Inc * Phone 1-800- WJ1-4401 * FAX: 408-577-6621 * e- mail: sales@wj.com * Web site: www.wj.com October 2004 MH303 Cellular-Band Quad-FET Mixer Product Information Typical Performance Charts Input IP3 vs RF Frequency +25 C, LO = +13 dBm 30 35 Input IP3 vs RF Frequency +25 C, IF = 70 MHz 50 L-I Isolation vs LO Frequency 25 C, LO = +13 dBm Input IP3 (dBm) Input IP3 (dBm) 20 IF = 100 MHz IF = 70 MHz IF = 50 MHz IF = 23 MHz Isolation (dB) 25 30 45 25 40 L-R 15 20 LO = +17 dBm LO = +15 dBm LO = +13 dBm LO = +11 dBm 35 10 770 820 870 920 970 15 770 820 870 920 970 30 700 750 800 LO Frequency (MHz) 850 900 RF Frequency (MHz) Conversion Loss vs RF Frequency +25 C, LO = +13 dBm 10 Conversion Loss (dB) RF Frequency (MHz) Conversion Loss vs RF Frequency +25 C, IF = 70 MHz 10 Conversion Loss (dB) IF = 23 MHz IF = 50 MHz IF = 70 MHz IF = 100 MHz 9 8 7 6 5 770 LO = +11 dBm LO = +13 dBm LO = +15 dBm LO = +17 dBm 9 8 7 6 5 770 820 870 920 970 820 870 920 970 RF Frequency (MHz) Return Loss vs RF Frequency +25 C, IF = 70 MHz, LO = +13 dBm 0 RF Return Loss (dB) RF Frequency (MHz) Return Loss vs LO Frequency +25 C, LO = +13 dBm Return Loss vs IF Frequency +25 C, RF = 870 MHz, LO = +13 dBm 0 -5 -10 -15 -20 -25 750 800 850 900 20 40 60 IF Frequency (MHz) 80 100 LO Frequency (MHz) 0 -5 -10 -15 -20 -25 820 870 920 970 LO Return Loss (dB) -10 -15 -20 -25 770 RF Frequency (MHz) 700 Application Circuit 3 2 6-lead 6-pin MLPM DFN 3 x 3 mm 1 LO RF IF Return Loss (dB) -5 T2 IF 6 4 5 M/A-Com E-Series, ETC1-1-13 RF 1:1 Transformer, 4.5 - 3000 MHz Specifications and infor mation are subject to change without notice WJ Communications, Inc * Phone 1-800- WJ1-4401 * FAX: 408-577-6621 * e- mail: sales@wj.com * Web site: www.wj.com October 2004 MH303 Cellular-Band Quad-FET Mixer Product Information MH303 Mechanical Information This package may contain lead-bearing materials. The plating material on the leads is SnPb. Package Information Product Marking The component will be laser marked with a model number "M303" designator exactly as shown followed by an assembly date code in location shown by "YYWW". A laser marked lot code will be in the location shown by "XXX" and is unique for every assembly lot. Tape and reel specifications for this part are located on the website in the "Application Notes" section. WJ Communications, Inc * Phone 1-800- WJ1-4401 * FAX: 408-577-6621 * e- mail: sales@wj.com * Web site: www.wj.com M303 YYWW XXX M303 YYWW XXX * Functional Schematic Diagram LO 180o Two-Way Power Divider IF RF 180o Two-Way Power Divider MH303 ESD / MSL Information ESD Rating: Value: Test: Standard: MSL Rating: Standard: Class 1B Passes at 500 V Human Body Model (HBM) JEDEC Standard JESD22-A114 Level 1 at 235 C convection reflow JEDEC Standard J-STD-020 Specifications and infor mation are subject to change without notice October 2004 MH303 Cellular-Band Quad-FET Mixer Product Information MH303-G Mechanical Information This package is lead-free/Green/RoHS-compliant. It is compatible with both lead-free (maximum 260C reflow temperature) and leaded (maximum 245C reflow temperature) soldering processes. The plating material on the leads is annealed matte tin over copper. Package Information Product Marking The component will be laser marked with a model number "G303" designator exactly as shown followed by an assembly date code in location shown by "YYWW". A laser marked lot code w be in the location shown by ill "XXX" and is unique for every assembly lot. Tape and reel specifications for this part are located on the website in the "Application Notes" section. WJ Communications, Inc * Phone 1-800- WJ1-4401 * FAX: 408-577-6621 * e- mail: sales@wj.com * Web site: www.wj.com G303 YYWW XXX G303 YYWW XXX * Functional Schematic Diagram LO 180o Two-Way Power Divider IF RF 180o Two-Way Power Divider MH303 ESD / MSL Information ESD Rating: Value: Test: Standard: MSL Rating: Standard: Class 1B Passes at 500 V Human Body Model (HBM) JEDEC Standard JESD22-A114 Level 1 at 260 C convection reflow JEDEC Standard J-STD-020 Specifications and infor mation are subject to change without notice October 2004 |
Price & Availability of MH303-RFID
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |